How should marine rubbing from Biltema be used?
Marine rubbing compound
Instructions for use:
By hand: Use a polishing cloth or microfibre cloth. Shake the bottle and pour some rubbing (around 3 cm) onto the polishing cloth. Polish with circular motions on a small area at a time. Dry by hand.
With polishing machine: Polish a smaller area at a time (50 x 50 cm). Work crosswise to avoid streaking/rings. Dry by hand. Recommended speed 700-1000 rpm
Ultimate Cut
- This product is used on matte surfaces and gelcoat.
- Effectively removes scratches and oxide layers.
- Repairs and restores most paint defects
- Can be used after wet sandpaper P800
- The product does not contain silicone and fillers.
Instructions:
The surface must be cleaned before you start polishing. For damaged and scratched surfaces, first sand using wet sandpaper, last sanding P800 (dark colours P 1200). Clean the surface again after sanding. Apply the polish to the surface with a sponge or microfibre cloth. Polish with a rotary or orbital polisher, starting at a low rpm and gradually increasing the speed. Max speed: 1800 rpm. Polish until all the damage is gone and full shine is achieved. If necessary, repeat the polishing. Working temperature: 15-25 °C.
